Steam Crave Hadron Plus DNA 250C Box Mod Kit | Stainless Steel & Glass

Steam Crave Hadron Plus DNA250C Advanced Kit 200W with Plus V2 RDTA is conposed of Steam Crave Hadron Plus DNA250C Mod and Steam Crave Plus V2 RDTA. 

Steam Crave Hadron Plus DNA250C Mod, made of Aluminium Alloy, is powered by dual 21700/ 20700/ 18650 batteries and can fire up to 200W output. 

Steam Crave Hadron Plus features DNA 250C chipset by Evolv with boost mode, replay function & accurate temperature control for stable performance. 

Steam Crave Plus V2 RDTA has two capacity options: 8ml e-juice (standard form), and the potential ultra-large 16ml capacity.

Steam Crave Plus V2 is a versatile tank as both an RTA and as an RDTA. And Plus V2 RDTA has 30 mm single coil postless deck and adopts side adjustable airflow system.

Parameters:

• Steam Crave Hadron Plus DNA250C Mod
• Size: 58* 34* 98 mm
• Material: Aluminium Alloy
• Battery: dual 21700/ 20700/ 18650 battery(Not Included)
• Input Voltage: 6.0V- 8.4V
• Battery Voltage: 3V-4.2V
• Output Voltage: 0.2V-8.0V
• Power: 5-200W
• Current Range: 0.5A-30A
• Max Charging Current: 3A (2A suggested)
• Temperature Range: 200℉-600℉
• Screen Pixel: 0.9” (80*160 pixel) full Color TFT Display
• Steam Crave Plus V2 RDTA
• Diameter: 30 mm
• Material: Stainless Steel & Glass
• Capacity: 8.0ml/16ml
• Drip Tip: 810 drip tip
• Resistance Supported: 0.1ohm-3.0ohm
• Coil Material supported: Nickel, Titanium, SS460, SS316, KA1, Nig0, Ni90

Features:

• Dual 21700 Batteries, Max 200W output
• DNA 250C chipset by Evolv
• The most versertile RDTA
• Boost mode and replay function
• Both An RTA And As An RDTA
• Side Adjustable Airflow System
• Single Coil Postless Deck
• Firmware upgrade
• Built-in onboard charging
• Fast Charging
• Pass-through
• On-the-go Use
• Atomizer protection
• Low resistance protection
• Onboard reverse polarity protection
• Short circuit protection
• Overheat protection
• Low Voltage step down protection

Packages:

• 1* Hadron Plus DNA 250C Box Mod (Evolv Logo on) without battery
• 1* USB Connecting Cable
• 1* User Manual
• 2* Battery Wrap
• 2* 18650 Sleeve
• 1* Aromamizer Plus RDTA equipped with Plus V2 Postless Deck
• 1* Spare 8ml Glass
• 1* 8ml Metal Extension
• 2* 6mm Chimney Reducer for Glass Tank Section and Metal Tank Section
• 1* Spare Part Bag of O-rings and Grub Srews, Slotted Screws
• 1* Allen Key
• 2* Coil Cotton
• 1* Manual
• 1* Mesh Deck Kit
• 1* Vape Band
• 1* SteamCrave Sticker